Справочник Пользователя для Panasonic cq-c9800n
CQ-C9800N/C9700N
English
9
8
Preparation
CQ-C9800N/C9700N
w
e
q
q Pull out the battery
case while pushing the
tab.
tab.
w Put a battery in the
case with (+)-side fac-
ing up.
ing up.
e Put the case back.
Battery Notes
¡
Remove and dispose of an old battery immediately.
¡
Battery Information:
Battery Type: Panasonic lithium battery (CR2025)
(Included)
Battery Life: Approximately 6 months under normal
use (at room temperature)
(Included)
Battery Life: Approximately 6 months under normal
use (at room temperature)
¡
Do not disassemble or short the battery. Do not throw
a battery into a fire.
a battery into a fire.
¡
Keep batteries away from children to avoid the risk of
accidents.
accidents.
¡
Follow local regulations when disposing of batteries.
OFF
ACC
IGN
For a ACC-equipped car, select ON. (
a
page 32) The
following functions are available. (default: off)
¡
The power is turned on automatically when inserting
a disc or magazine.
a disc or magazine.
¡
The clock can be displayed even if the power is off.
(
(
a
page 14)
Caution: Improper use of batteries may cause
overheating, an explosion or ignition, resulting in
injury or a fire.
overheating, an explosion or ignition, resulting in
injury or a fire.
Caution:
Be sure to select OFF when your car has no
ACC position in the ignition switch. Failure
to do this could cause the battery to go
dead.
Be sure to select OFF when your car has no
ACC position in the ignition switch. Failure
to do this could cause the battery to go
dead.
Notes:
¡
Adjust the clock when “NO CT” appears on the dis-
play.
play.
¡
When a broadcast of FM Radio Data System is
received, the clock is put right automatically by the
Clock Time service. (
received, the clock is put right automatically by the
Clock Time service. (
a
page 18)
1
Press [MENU] to display the menu dis-
play.
For using the remote control, hold down [MENU]
for 2 sec. or more.
for 2 sec. or more.
2
Press []] or [[] to display the DIS-
PLAY menu.
3
Press [
{
] to select “CLOCK ADJ”.
4
Press [BAND] (SET) to confirm the dis-
play.
5
Adjust the setting value.
[[]
: Adjusting minutes
[]]
: Adjusting hours
[
}
]
: Forward
[
{
]
: Backward
6
Press [BAND] (SET) to confirm the
adjustment.
7
Press [MENU].
For using the remote control, hold down [MENU]
for 2 sec. or more.
for 2 sec. or more.
The demonstration message appears for first use.
1
Press [SOURCE] (PWR: Power).
The demonstration screen appears.
2
Press [DISP] (Display).
The demonstration screen is cancelled, and no more
appears.
appears.
Note: If you would like to turn on the power and make
the demonstration message appear, hold down
[SOURCE] (PWR: Power) for 4 sec. or more. (at ACC
on setting)
the demonstration message appear, hold down
[SOURCE] (PWR: Power) for 4 sec. or more. (at ACC
on setting)
You may need to set the following depending on the
devices to be connected.
devices to be connected.
Using Subwoofer
¡
Subwoofer level adjustment (
a
page 30)
¡
Subwoofer low pass filter (
a
page 30)
The following functions are activated when the Security
Function is ON. (
Function is ON. (
a
page 32)
¡
The security indicator lights up when removing the
face plate.
face plate.
¡
The alarm sounds and the message appears on the
screen to warn you to remove the face plate at power
off.
screen to warn you to remove the face plate at power
off.
Note: After the ACC setting is set to on, these functions
work when turning the main power off. (
work when turning the main power off. (
a
page 32)
Security Indicator
CQ-C9800N
BAND
Preparation
First T
ime Power On
(DEMONSTRATION)
Batter
y into Remote Control
ACC Setting
Security Function
Setting
Other Settings
Clock adjustment
BAND