Справочник Пользователя для Panasonic cq-c9701n

11

10

¡

Adjust the clock when “NO CT” appears on the dis-
play.

¡

When a broadcast of FM Radio Data System is
received, the clock is put right automatically by the
Clock Time service. (

a

page 22)

Press [MENU] to display the menu dis-

play.

For using the remote control, hold down [MENU]
for 2 sec. or more.

Press []] or [[] to display the DIS-

PLAY menu.

Press [

{

] to select “CLOCK ADJ”.

Press [BAND] (SET) to confirm the dis-

play.

Adjust the setting value.

[[]

: Adjusting minutes

[]]

: Adjusting hours

}

: Forward

{

: Backward

Press [BAND] (SET) to confirm the

adjustment.

Note: For cancellation of clock adjustment, press
[DISP].

Press [MENU].

For using the remote control, hold down [MENU]
for 2 sec. or more.

When the power is switched on for the first time, a
demonstration message appears on the display. Press
[DISP] to change to regular mode.

Set your car’s ignition switch to the ACC

or ON position.

Press [SRC] (PWR: POWER).

The demonstration screen appears.

Example: CQ-C9901N

Press [DISP: DISPLAY].

The demonstration screen is cancelled, and no more 
appears.

Note: If you would like to turn on the power and make
the demonstration message appear, hold down [SRC]
(PWR: POWER) for 4 sec. or more. (at ACC on
setting)

You may need to set the following depending on the
devices to be connected.

¡

Subwoofer level adjustment (

a

page 36)

¡

Subwoofer low pass filter (

a

page 36)

If you connect TV to AUX1 terminal, set the AUX1 setting
to TV.

Press [SRC: SOURCE] to select the

AUX1 mode. 

(

a

page 14)

Press [MENU] to display the menu dis-

play.

For using the remote control, hold down [MENU]
for 2 sec. or more.

Press [BAND] (SET) to adjust.

: TV

: Other devices (Default)

Note: When using an external TV unit manufactured by
a third party, select the TV mode.

Press [MENU] to confirm the adjust-

ment.

(DEMONSTRATION)

(CLOCK ADJ: CLOCK ADJUSTMENT)

Pull the insulation film out
from the backside of
remote control gently.

¡Keep batteries and insulation film out of reach of

infants. If an infant ingests a battery, please seek
immediate medical attention.

¡ Remove and dispose of an old battery immediately.
¡ Do not disassemble, heat or short a battery. Do

not throw a battery into a fire or water.

¡ Follow local regulations when disposing of a bat-

tery.

¡Improper use of a battery may cause overheating,

an explosion or ignition, resulting in injury or a fire.

¡Battery Information:

Battery Type: Panasonic lithium battery (CR2025)
(Included in the remote control)
Battery Life: Approximately 6 months under normal
use (at room temperature)

q

w

q Remove the battery holder

with the remote control unit
placed on a flat surface.
q Stick your thumbnail into

the groove, and push the
holder in the direction of
the arrow, and at the
same time.

w Pull it out in the direction

of the arrow using a
tough pointed object.

w Put a battery in the case with

(+) side facing up.

e Put the case back.

2

3

Tough pointed object

Back side

The following functions are activated when the Security
Function is ON. (

a 

page 38)

¡

The security indicator blinks when removing the face
plate.

¡

The alarm sounds and the message appears on the
screen to warn you to remove the face plate at power
off.

Security Indicator

OFF

ACC

IGN

For a ACC-equipped car, select ON. (

a

page 38) The

following functions are available. (default: off)

¡

The power is turned on automatically when inserting a
disc or magazine.

¡

The clock can be displayed even if the power is off.
(

a

page 15)

Insulation film