Справочник Пользователя для Panasonic cq-rd324n
19
CQ-RD324N
16
E
N
G
L
I
S
H
Cautions:
8 Confirm the note on the previous page and make connections to the connectors on car side.
8 This product is designed to be used in a car having 12-volt negative ground battery system.
8
8 This product is designed to be used in a car having 12-volt negative ground battery system.
8
To prevent damage to the unit, be sure to follow the connection diagram below.
8
Remove the covering of the leads about 5 mm long from their end before connecting. (except for ISO connector’s cords)
8
Do not insert the power connector into the unit until the wiring is completed.
8
Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and keep cable ter-
minals free from touching any metal parts.
minals free from touching any metal parts.
Example:
In case of using the supplied power and speaker
connector (See the previous page)
2
1
(–) (+)
(–) (+)
(–) (+)
(–) (+)
Panasonic
Panasonic
e
Power and
Speaker
Connector
Speaker
Connector
Fuse
e
Power and
Speaker
Connector
Power and
Speaker
Connector
(Yellow)
(Red)
(Black)
(Dark blue)
(Violet w/black stripe)
(Gray w/black stripe)
(White w/black
stripe)
stripe)
(White)
(Gray)
(Green w/black
stripe)
stripe)
(Green)
(Violet)
Left Speaker
(Front)
Left Speaker
(Rear)
Right Speaker
(Front)
Right Speaker
(Rear)
Antenna
ISO Antenna
Conversion Cord
Conversion Cord
(Option)
(If needed)
(If needed)
Cassette Receiver
CQ-RD324N
CQ-RD324N
BATTERY
15A
ACC
(L)(White)
(R)(Red)
CD Changer
Control Connector
Control Connector
CH
•
C-IN
Extension Cord
(DIN/BATT/RCA/GND)
(DIN/BATT/RCA/GND)
(Black)
CD Changer (Option)
CX-DP88N
CX-DP88N
Ground Lead
To a clean, bare metallic
part of the car chassis
To a clean, bare metallic
part of the car chassis
DIN Cord
(Yellow)
Fuse (3A)
Battery Lead
To the car battery, continuous
+12V DC
To the car battery, continuous
+12V DC
RCA Cord
RCA Cord
Battery Lead
To the car battery, continuous +12V DC
To the car battery, continuous +12V DC
If the fuse (rear panel) blows frequently, they
may be something wrong with the unit.
Consult your nearest Panasonic Service
Center for service.
may be something wrong with the unit.
Consult your nearest Panasonic Service
Center for service.
Power Lead (ACC or IGN)
To ACC power, +12V DC
To ACC power, +12V DC
Ground Lead
To a clean, bare metallic part of the
car chassis
To a clean, bare metallic part of the
car chassis
Motor Antenna Relay Control Lead
(To Motor Antenna) (Max. 500mA)
This lead is not intended for use with
switch actuated power antenna.
(To Motor Antenna) (Max. 500mA)
This lead is not intended for use with
switch actuated power antenna.
¡This unit can be connected to an
optional CD changer (CX-DP9061/
DP9060EN, CX-DP88N, CX-DP801/
DP803EN or CX-DP601EN) and
optional extension cord.
DP9060EN, CX-DP88N, CX-DP801/
DP803EN or CX-DP601EN) and
optional extension cord.
¡For details consult your nearest
authorized Panasonic Dealer.
¡For connection to a CD changer,
refer to the operating instructions
of the CD changer (CX-DP9061/
DP9060EN, CX-DP88N, CX-DP801/
DP803EN or CX-DP601EN).
of the CD changer (CX-DP9061/
DP9060EN, CX-DP88N, CX-DP801/
DP803EN or CX-DP601EN).
Fuse (15 A)
To remove the Fuse