Инструкции По Обслуживанию для FIC a985
Maintenance & Disassembly
FIC A985 Service Manual
5-13
5.5.9 Removing the System Top Cover
The procedure for removing the system top cover is as follows:
1. Before removing the system top case, you need first to disassemble keyboard, heat sink
plate, LCD panel, HDD, and CD-ROM.
2. To remove the system top cover, you need to remove several screws. There are thirteen
screws found on the top case - five screws on the under side and another eight screws on
the upper side as indicated on the figure below. Remove them all.
the upper side as indicated on the figure below. Remove them all.
16 Screws
Figure 5-16 System Top Cover Screw Locations
3. Slowly unsnap the top cover from the bottom case. Release one cable connected from the
glide pad to the battery board and the other cable connected from the internal microphone
to the audio board. Then pull out the top cover.
to the audio board. Then pull out the top cover.
5.5.10 Removing the DC-DC Board , CD-ROM and Jack/B ,TR/B
The procedures for removing and replacing the DC-DC Board is as follows:
1. The DC-DC Board was located in the lower side of CPU.
2. Removing it and life it up from the socket carefully.
PDF created with FinePrint pdfFactory trial version