Инструкции По Обслуживанию для FIC a985
Maintenance & Disassembly
5-12
FIC A985 Service Manual
5.5.8 Removing the Internal Hard Disk Drive
The notebook provides a built-in hard disk for the primary IDE controller. The HDD is an
industry standard 2.5” IDE disk drive with a maximum height of 9.5mm, and can be upgraded
with another standard 2.5” HDD with a maximum height of 9.5mm.
1. Find out the built-in hard disk secured with two screws at the right corner of the hard disk.
Remove that screw and carefully pull the hard disk module from the connector.
2 Screws
Figure 5-14 Remove Two Screws Securing HDD
2. Remove four screws of frame HDD bracket plate. Two small ones of them are at the front
side, and others are at the both sides
4 Screws
Figure 5-15 Screws Locations of the frame HDD bracket plate
PDF created with FinePrint pdfFactory trial version