Справочник Пользователя для Panasonic wv-cu360
17
SET
SET
ESC
Unauthorized
Unauthorized
OPERATE
LOGIN
ALARM
SET
Ready for user password entry
Authorized
User password entry
Blinks
The unit that is assigned to the UNIT A/UNIT
button as number 1 is selected automatically.
button as number 1 is selected automatically.
Indicates after authorized
Goes off after log out
Goes off after log out
LOGIN/LOGOUT
User authorization with password input is necessary for
access to the system controller. If [User Certification OFF]
is selected in the user authorization (certification) setting,
password input is not necessary because the system con-
troller is automatically ready for operation when the power
is turned on.
access to the system controller. If [User Certification OFF]
is selected in the user authorization (certification) setting,
password input is not necessary because the system con-
troller is automatically ready for operation when the power
is turned on.
■
LOG IN
1. Insert the DC plug into the DC 9V IN jack and connect
the AC adapter to an AC outlet.
2. The controller number, software version, and [LogIn]
appears in order on the LED display.
3. Press the CAM/SET button.
4. Enter a 5-digit user password with the Numeric buttons.
The password appears as each [–] digit.
Initial factory setting is [12345] (See page 12).
Initial factory setting is [12345] (See page 12).
5. Press the CAM/SET button.
6. If the user password is successfully entered for user
authorization, LOGIN indicator lights up.
The unit that is assigned to the UNIT A/UNIT button as
number 1 is selected automatically.
If its entry has failed, [Error] appears on the display.
The display returns to [LogIn].
The unit that is assigned to the UNIT A/UNIT button as
number 1 is selected automatically.
If its entry has failed, [Error] appears on the display.
The display returns to [LogIn].
■
LOG OUT
1. Press the MON/ESC and CAM/SET buttons for about 2
seconds simultaneously.
2. [LogIn] appears on the display and the LOGIN indicator
goes off.
3. Disconnect the DC plug from the DC 9V IN jack and the
AC adapter from the AC outlet.
Note:
If power remains on after finishing logout, the
alarm indicator and alarm suspend indicator keep
indicating the present system mode. The alarm indi-
cator blinks in case of an alarm is activated after fin-
ishing logout. It changes to steady light when the
alarm is automatically reset.
indicating the present system mode. The alarm indi-
cator blinks in case of an alarm is activated after fin-
ishing logout. It changes to steady light when the
alarm is automatically reset.