Panasonic wv-cu360 User Manual

17

Unauthorized

Unauthorized

Ready for user password entry

Authorized

User password entry

Blinks

The unit that is assigned to the UNIT A/UNIT 
button as number 1 is selected automatically.

Indicates after authorized
   Goes off after log out

User authorization with password input is necessary for
access to the system controller. If [User Certification OFF]
is selected in the user authorization (certification) setting,
password input is not necessary because the system con-
troller is automatically ready for operation when the power
is turned on.

■

1. Insert the DC plug into the DC 9V IN jack and connect

the AC adapter to an AC outlet.

2. The controller number, software version, and [LogIn]

appears in order on the LED display.

3. Press the CAM/SET button.

4. Enter a 5-digit user password with the Numeric buttons.

The password appears as each [–] digit.
Initial factory setting is [12345] (See page 12).

5. Press the CAM/SET button.

6. If the user password is successfully entered for user

authorization, LOGIN indicator lights up.
The unit that is assigned to the UNIT A/UNIT button as
number 1 is selected automatically.
If its entry has failed, [Error] appears on the display.
The display returns to [LogIn].

■

1. Press the MON/ESC and CAM/SET buttons for about 2

seconds simultaneously.

2. [LogIn] appears on the display and the LOGIN indicator

goes off.

3. Disconnect the DC plug from the DC 9V IN jack and the

AC adapter from the AC outlet.

If power remains on after finishing logout, the

alarm indicator and alarm suspend indicator keep
indicating the present system mode. The alarm indi-
cator blinks in case of an alarm is activated after fin-
ishing logout. It changes to steady light when the
alarm is automatically reset.