Инструкция для buell s1 lightning '97

 

1.

 The vent valve fitting (5) is screwed into

the top of the fuel tank.

2.

Remove vent hose cable strap. Disconnect hose (6) from
fitting. Remove fitting.

3.

Remove check balls (4, 3) from vent valve.

4.

Remove fuel filler cap and O-ring. Remove vent valve.

5.

If necessary, label overflow vent hose connected to can-
ister and remove from canister fitting.

 

1.

See 

 The canister assembly mounts on a

frame tube along the left side of the motorcycle.

2.

Label the three hoses connected to canister. Disconnect
hoses from canister.

3.

Depress locking tab at the front end of the canister
mounting bracket. Slide canister towards the front wheel
until it disengages from the bracket and remove.

4.

See 

 Remove screws, washers and locknuts

(5) to detach mounting plate (2) from clamps (1).

5.

Remove countersunk screws and locknuts (4) to sepa-
rate bracket (3) from mounting plate (2).

1

 

1.

 Screw vent valve (2) into fuel tank.

2.

Drop check balls (3, 4) into vent valve.

3.

Attach vent valve fitting (5).

4.

Install fuel cap and 

 

 O-ring.

5.

Attach overflow vent hose to fitting with a 

 

 cable

strap.

6.

Attach overflow vent hose to bottom fitting on canister if
disconnected.

b0255x4x

5754