Инструкции По Обслуживанию для kymco mo kxr 250

This chapter includes all information necessary to perform recommended inspections and

adjustments. These preventive maintenance procedures, if followed, will ensure more reliable

vehicle operation and a longer service life. The need for costly overhaul work will be greatly

reduced. This information applies to vehicles already in service ad well as new vehicles that are

being prepared for sale. All service technicians should be familiar with this entire chapter.

Initial

Every

1

month

3

month

6

month

6

month

1

year

Check valve clearance. Adjust if

necessary.

Check condition. Adjust gap and

clean. Replace if necessary.

Clean.

Replace if necessary.

Every 20~40

(more often in wet or dusty areas.)

Check idle speed/starter operation.

Adjust if necessary.

Check fuel hose for cracks or

damage. Replace if necessary.

Replace (Warm engine before

draining).

Check coolant leakage.

Replace if necessary.

Replace coolant every 24 months.

Clean.

Replace if necessary.

Check and adjust

slack/alignment/clean/lube.

Check oil leakage. Replace every 12

months.

Check operation and brake fluid.

Replace brake pad if necessary.

Check operation/replace if damage

or excessive wear.

Check balance/damage/runout.

Replace if necessary.

Check bearing assembly for

looseness/damage. Replace if

damaged.

Check operation/replace if damage.

Check toe-in/adjust if necessary.

Rear swing arm shafts Lubricate every 6 months.

Check all chassis fittings and

fasteners. Correct if necessary.

•In the interest of safety, we recommend these items should be serviced only by an authorized

KYMCO motorcycle dealer.