Справочник Пользователя для Echo HC-235

1.  Throttle

  Release throttle and allow engine to return to idle before shutting off 

engine.

2.  Stop Switch 

  Move stop switch (A) to STOP position.

If engine does not stop when stop switch is moved to STOP posi-

tion, close choke - COLD START position - to stall engine. Have 

your ECHO dealer repair stop switch before using hedge clipper 

again.

The starting procedure is the same as Cold Start except DO NOT close 

the choke.

The blades must not move at idle, otherwise serious personal injury 

may result. Periodic carburetor adjustment may be necessary to as-

sure blades do not move at idle.  

If blades move, readjust carburetor according to “Carburetor Ad-

justment” instructions in this manual or see your ECHO Dealer. 

1.  Stop Switch                                            

  Move stop switch (A) away from the STOP position.

2.  Purge Bulb

  Pump purge bulb (C) until fuel is visible and flows freely in the 

clear fuel tank return line. Pump bulb an additional 4 or 5 times.

3.  Recoil Starter

  Place the unit on a flat, clear area.  Grip the support handle securely 

with right hand, and pull the recoil starter handle (D) with left hand 

until engine fires.

If engine does not start after 5 pulls, use Cold Start Procedure.