Справочник Пользователя для Epson photopc 3000z
Maintenance and Troubleshooting
7-3
7
Problems and Solutions
Refer to this list of problems and possible solutions before
calling your dealer for help.
calling your dealer for help.
Camera problems
The following are problems that you may encounter while
using your camera.
using your camera.
The camera has no power.
The camera may have shut off automatically. To turn
the power back on, press the POWER button.
Alternatively, you can turn the camera back on by
pressing the shutter button, or pressing a button on the
back of the camera, depending on the camera’s dial
switch position. See “Turning the camera back on” on
page 4-21 for more details.
the power back on, press the POWER button.
Alternatively, you can turn the camera back on by
pressing the shutter button, or pressing a button on the
back of the camera, depending on the camera’s dial
switch position. See “Turning the camera back on” on
page 4-21 for more details.
Make sure that the batteries are installed correctly. See
“Installing the batteries” on page 1-7. Also, make sure
that you are using appropriate batteries and that they
are charged. See “Replacing the batteries” on page 1-8
and replace the batteries if necessary.
“Installing the batteries” on page 1-7. Also, make sure
that you are using appropriate batteries and that they
are charged. See “Replacing the batteries” on page 1-8
and replace the batteries if necessary.
The batteries included with the camera need to be
charged before use. See “Charging the batteries” on
page 1-6 to charge the batteries.
charged before use. See “Charging the batteries” on
page 1-6 to charge the batteries.
If you are using the AC adapter, make sure that it is
plugged into a working outlet.
plugged into a working outlet.
You cannot see clearly through the viewfinder.
Adjust the diopter by turning the correction dial next
to the viewfinder. The dial switch must be set to
to the viewfinder. The dial switch must be set to
;
otherwise you will be unable to adjust the diopter.
The camera does not take a picture when you press the
shutter button.
shutter button.
The flash may be recharging. Wait until the indicator
light beside the viewfinder turns green, then try again.
light beside the viewfinder turns green, then try again.
Make sure that the memory card is installed correctly.
To install a memory card, see “Installing and removing
a CompactFlash Card” on page 1-13.
To install a memory card, see “Installing and removing
a CompactFlash Card” on page 1-13.
The camera’s memory card may be full. Check the
picture counter on the display panel. If it reads 0 (zero),
your memory card is full. Erase some pictures using
the LCD monitor, or transfer the pictures to your
computer and then erase them.
picture counter on the display panel. If it reads 0 (zero),
your memory card is full. Erase some pictures using
the LCD monitor, or transfer the pictures to your
computer and then erase them.
Note:
To erase pictures using the LCD monitor, see “Erasing
images” on page 3-7. To transfer pictures to your
computer before erasing them, see the EPSON Digital
Camera Software User’s Guide.
To erase pictures using the LCD monitor, see “Erasing
images” on page 3-7. To transfer pictures to your
computer before erasing them, see the EPSON Digital
Camera Software User’s Guide.