Справочник Пользователя для Siemens siemens network router mc35
Remote-SAT User's Guide
MC35_SAT_01_v02.00
Page 33 of 65
11.01.2002
1.4.10 AT^SSTGI Remote-SAT Get Information – Display Text (33)
Write command
AT^SSTGI=33
This command is to be used upon receiving an unsolicited result code
^SSTN:33.
^SSTN:33.
The TA is being passed a message to display to the user, which can have
different display characteristics.
different display characteristics.
Text and an Icon Identifier can be passed to the TA to display to the user.
Response
^SSTGI: <cmdType>, <commandDetails>, <text>, <immediateResponse>,
<iconQualifier>, <iconId> <CR> <LF>
<iconQualifier>, <iconId> <CR> <LF>
Parameters
<cmdType>
33 – Proactive command ID, see Table 1
<commandDetails>
Unsigned Integer, range 0 – 255, used as a bitfield.
bit 1:
bit 1:
0 = normal priority
1 = high priority
1 = high priority
bits 2-7: = RFU
bit 8:
bit 8:
0 = clear message after a delay
1 = wait for user to clear message
1 = wait for user to clear message
<text>
String to be displayed (up to 240 bytes)
<immediateResponse> Indicates when to send TERMINAL RESPONSE
0 = send TERMINAL RESPONSE when text
clears from screen
1 = TERMINAL RESPONSE sent immediately
clears from screen
1 = TERMINAL RESPONSE sent immediately
<iconQualifier>
Unsigned Integer, range 0 – 255, used as a bitfield.
bit 1:
bit 1:
0 = icon is self explanatory and replaces text
1 = icon is not self-explanatory and shall be
displayed with the text
Determined value only if associated icon id is
not 0 (an icon exists).
1 = icon is not self-explanatory and shall be
displayed with the text
Determined value only if associated icon id is
not 0 (an icon exists).
bits 2-8: = RFU
<iconId>
0-255, 0: no icon
Reference
Siemens
Note