Справочник Пользователя для Shark gi468cn 10

 1-800-798-7398

www.sharkclean.com

English

We suggest that you self-clean the 
iron at least once every two weeks to 
remove scale and calcium. If you know 
you have very hard water we 
recommend that you self-clean the 
iron more often. 

  Set the steam control lever to any 

 

steam position.

  Fill the water tank up to the “MAX” 

 

level. Do not overfill.

  Stand the iron on its heel, standing up 

 

on a protected surface and plug into 

 

the electrical outlet.

  Press the Electronic Temperature 

 

Control button to “•••” setting. Wait 

 

until the iron heats up and the 

 

Temperature Indicator lights up.

  Hold the iron horizontally over the

 

sink. Turn the steam control lever all 

 

the way to the right to the 

 

SELF CLEAN position.

  Move the iron back and forth. Hot 

 

water and steam will now be ejected 

 

from the holes in the soleplate. Use 

 

caution when doing this as the water 

 

and the steam are hot enough to 

 

cause burns. The impurities and scale 

 

are washed away.

  Continue moving the iron back and 

 

forth until all the impurities are

 

flushed. 

  Empty the water tank as described on 

 

Page 12. Don’t touch the hot surfaces, 

 

water or steam because injury may 

 

occur. 

  Turn the Steam Control Lever to “0” 

 

position when the water tank is empty

 Place the iron back upright on its heel 

 

to cool down before storing.

  Use LOW settings for nylon and 

 

other synthetics.

  Use    setting for wool, silks and    

 

blends.

  Use        setting for polyester.

  Use highest          settings for  

 

 

cottons and linens.

 

Always read garment labels and 

 

follow the manufacturer’s ironing 

 

instructions.

  Always turn the variable steam control 

 

to “0” after you have emptied the 

 

water tank.

  Allow the iron to cool down.

  Always store the iron in the upright 

 

position to protect the soleplate.

  Every two weeks, clean the exterior of 

 

the iron with a damp cloth and wipe 

 

dry.

  If you use spray starch, wipe the 

 

soleplate with a soft, damp cloth after 

 

every use before unplugging. Please 

 

be careful if the iron is hot when 

 

cleaning the solepate.

  If the iron hasn’t been used in a few 

 

weeks, hold the iron horizontally and 

 

allow steaming for 2 minutes before 

 

ironing.