Справочник Пользователя для Shark gi468cn 10

 1-800-798-7398

www.sharkclean.com

English

Iron should be plugged into a 120V AC electric outlet only.

Make sure the plug is securely in the socket.

Temperature setting might be too low.

Try turning to a higher setting.

Variable Steam Control Dial may be set in “self clean” position.  
Align the dial to the "0" to "Max" steam setting.

Iron may not be hot enough. Set temperature to “MAX” position. 
Always allow iron sufficient time to heat up before activating the 
variable steam control.

Overuse the steam burst. Allow more time between each burst.

This is normal.

Follow the instructions for first-time use and allow iron to 

steam through 2-3 fillings and press the steam burst button 
occasionally to eliminate small white particles. 

Water tank may be empty or water level is very low. Add 

water.

Make sure the fabric/temperature setting and the variable 
steam control are correctly set. For maximum steam, set “MAX” 

on steam control and the temperature setting should be set on 
“•••.”

Steam control dial is set on “0.”

The soleplate is not hot enough and the anti-drip feature 

switches off the steam. Always allow the iron to reach the 
selected temperature with the variable steam control setting at 

“0.” For more steam, turn temperature dial to a higher setting 

and the steam control to “MAX.”

If the temperature setting and steam control settings are 

correct and there is no steam, gently move the iron left or right 
a couple of times.  Move the Steam Control Dial from “0” to 

“Max” a few times.