Справочник Пользователя для Alliance Laundry Systems sc50

27

F232062

Allow a minimum of 12 inches (305 mm) at 
the rear for 18-pound and 25-pound capacity 
models and a minimum of 18 inches (457 mm) 
at the rear for the larger machines. Allow 
2 inches (51mm) at the sides and 1 inch 
(25 mm) between machines in multiple 
installations. Dimensional clearances are 
indicated in Figures 9 through 14 for each size 
of machine, starting with the 18-pound model 
and finishing with the 80-pound model.

Note: The dimensional clearances for the 
80-pound model are dependent upon which set 
of mounting bolt holes is used. If the machine 
is intended for close mounting (mounting bolt 
pattern labeled "A" in Figure 28), follow the 
clearances in Figure 14. If the machine is 
intended for standard mounting (mounting bolt 
pattern labeled "B" in Figure 28), provide a 
minimum clearance of 8 inches (203 mm) at 
each side of the machine in addition to the 
clearances in Figure 14.

Figure 9

Figure 10

H019IE1A

H020IE1A