Справочник Пользователя для Tecumseh snow king lh195sp

Скачать
Страница из 32
Page 8
4-Cycle • Snow King Engine
181-1275-14
E. Filling Fuel Tank
An adult should fuel this engine. 
NEVER allow children to refuel this 
engine. Gasoline (fuel) vapors are highly flammable and 
can explode. Fuel vapors can spread and be ignited by a 
spark or flame many feet away from engine. To prevent 
injury or death from fuel fires, follow these instructions:
1. Stop engine and allow it to cool before refueling.
2. Be sure engine is outdoors and in a well-ventilated 
area.
3. Clean area around fuel fill cap and remove fuel fill cap. 
See Figure 14 on page 7. Afterward, continue reading 
instructions below.
 NOTE
4. Using an approved red GASOLINE container, add fuel 
slowly, being careful to avoid spilling. DO NOT overfill 
fuel tank. Leave space in the tank to allow fuel to 
expand without overflowing.
5. Replace anti-splash fuel fill cap securely and wipe up 
spilled fuel before starting engine. If fuel is spilled DO 
NOT start engine. Move machine away from area of 
spillage. Avoid creating any source of ignition until fuel 
vapors are gone.
 NOTE
Replace a damaged or missing fuel fill cap only with a 
genuine Tecumseh replacement anti-splash fuel fill cap. 
Failure to do so may VOID YOUR WARRANTY 
See Figure 15. 
6. Be sure fuel valve, if present (see equipment manufac-
turer’s instructions) is open. See Figure 16.
F. Electrical Power
 NOTES
When connecting power cord, always connect power cord 
to switch box on engine first; then into outlet. See 
Figure 17.
European 220V A.C. Applications use an appropriate 
grounded extension lead, available locally.
Determine what type of power source outlet you will be 
connecting the power cord to, before you start your engine. 
See "A. Engines with Electric Starters" instructions on page 
10.
!
WARNING
Figure 15. Possible Anti-Splash Fuel Fill Cap(s)
Figure 16. Fuel Valve Positions
Figure 17. Electric Starter Connections
Front View
Bottom View
Fuel Tank
Fuel Valve “OPEN” 
Position Shown
Turn Valve 
Clockwise To 
“OFF” Position
1. Power Cord to Outlet
2. Switch Box
3. Starter Button
4. Schuko Plug
5. Power Cord to Switch Box on Engine
6. Electric Starter Switch Box on Engine
1
5
2
3
120V A.C.
1
5
2
3
4
220V A.C.
6