Справочник Пользователя для Philips mc-30
18
English
3140 115 27913
Clock/Timer
Setting the clock
There are two possible methods for setting the
clock: manually or automatically by using RDS.
clock: manually or automatically by using RDS.
Automatic clock setting (RDS versions
only)
only)
1
Tune to a RDS station (see TUNER).
2
Press CLOCK for more than 2 seconds.
➜ SEARCH RDS TIME is displayed for a
maximum of 90 seconds; the time is then
displayed.
➜ NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.
maximum of 90 seconds; the time is then
displayed.
➜ NO RDS TIME is displayed if no time signal
has been received and you will have to set the
clock manually.
Manual clock setting
1
In standby, press CLOCK.
➜ The clock digits for the hours flash.
2
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
hours up; anti-clockwise for hours down.
3
Press CLOCK again.
➜ The clock digits for the minutes flash.
4
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
minutes up; anti-clockwise for minutes down.
5
Press CLOCK to confirm the time.
Setting TIMER
¶ The system can be used as an alarm clock,
whereby the CD, TUNER or TAPE is switched on
at a set time. The clock time needs to be set first
before the timer can be used.
at a set time. The clock time needs to be set first
before the timer can be used.
¶ You can also use it to record a favourite tuner
programme at a set period (REC TUN, see TAPE
RECORDER)
RECORDER)
¶ During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
automatically.
1
In any mode, press TIMER ON•OFF for more
than 2 seconds.
than 2 seconds.
2
Turn VOLUME clockwise to select sound
source.
➜ Display sequence shows CD, TUNER, TAPE
or
source.
➜ Display sequence shows CD, TUNER, TAPE
or
REC TUNER.
3
Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
desired mode.
➜ The selected source
,
or
RECORD
is shown.
Display sequence scrolls
Display sequence scrolls
SET ON TIME and
TIMER
flashes. The clock digits for the hours flash.
4
Turn VOLUME to set the hours: clockwise for
hours up; anti-clockwise for hours down.
hours up; anti-clockwise for hours down.
5
Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
6
Turn VOLUME to set the minutes: clockwise for
minutes up; anti-clockwise for minutes down.
minutes up; anti-clockwise for minutes down.
7
Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
TIMER
¶ In standby or during playback, press TIMER
ON•OFF on the system once (TIMER on the
remote control).
remote control).
➜ Display shows
if activated, and
disappears if deactivated.
TUNING
RDS/ CLOCK
SIDE A/B
VOLUME
SHUFFLE
SOURCE
TIMER ON•OFF
PROGRAM
REPEAT
REV MODE/ BAND
STANDBY-ON
RECORD
M C - 3 0 M I C R O S Y S T E M
iR
FWD á/ë
REW à /í
PRESET
STOP
PLAY•PAUSE
pg 001-021/MC30/22-Eng
12/7/00, 1:33 PM
18