Справочник Пользователя для Pelco FR8301

 

14

C1641M-A  (3/05)

 

 Before mounting the FR8301 receiver to a wall, ensure that there is adequate 

space at both ends for viewing the front-panel LEDs and for making the various rear-
panel cable connections.

To attach the FR8301 receiver to a wall using the supplied wall clip, refer to  Figure 7 and do the 
following:

1.

Using the two vertical or horizontal wall-mounting holes, attach the wall clip to a wall 
using two screws (not provided).

2.

Slide the module into the clip until the two holes on the bottom of the module align with 
the two holes on the lower flange of the clip.

3.

Attach the module to the clip using the two Phillips pan head screws provided for the clip.

 

 

 

Mounting the FR8301 Receiver to a Wall Using the Wall Clip

FR8301

RECEIVER

WALL CLIP

LOWER
FLANGE

SCREW, PHILLIPS
PAN HEAD WITH
LOCK WASHER (2)

HORIZONTAL
MOUNTING HOLE (2)

UPPER
FLANGE

VERTICAL
MOUNTING HOLE (2)