Справочник Пользователя для Garmin gns 500w

97

190-00356-00 Rev E

Vectors-To-Final Approach

10.   As you cross the FAF, the destination sequences 

to the MAP (“RW22”, the runway threshold). 
With the needle centered, fly toward the MAP, 
observing the altitude minimums dictated by 
the  approach  plate. When  viewing  the  map 
page, you’ll note that the final course segment 
is displayed in magenta (the active leg of the 
flight  plan  always  appears  in  magenta)  and 
a dashed line extends the course beyond the 
MAP. 

11.   As you approach the MAP, a waypoint alert 

(“ARRIVING WPT”) will appear in the lower 
right corner. CDI scaling continues to tighten 
from  0.3  NM  to  350  feet,  full-scale  deflec-
tion. 

12.   As  you  cross  the  MAP, “SUSP”  will  appear 

above the OBS key, indicating that automatic 
sequencing  of  approach  waypoints  will  be 
suspended  at  the  MAP. A “from”  indication 
will be displayed on the CDI and default NAV 
page,  but  course  guidance  along  the  final 
approach course will continue. Do NOT follow 
this extended course. Follow published missed 
approach  procedures  using  the  OBS  key  to 
initiate the missed approach sequence. 

Let’s take a second look at the “VOR 22” approach

into Billard Municipal. Instead of following the DME
arc, ATC tells you to expect vectors onto the final 
approach course. There are several ways to select “vec-
tors to final” with the 400W-series unit. The first two 
options below will normally require the least workload 
to accomplish: 

• When the approach is first selected, choose “VEC-

TORS” from the transitions window. 

• Load a full approach — including the IAF from

the transitions window. When cleared, press 
PROC and select “Activate Vectors-To-Final?”.

• Load the full approach. Use the direct-to key (by 

pressing it twice) from the active flight plan page 
to select the desired leg of the approach. 

1.   Select Billard Municipal (KTOP) as your desti-

nation, using the direct-to key, or as the last 
waypoint in a flight plan. 

2.   Press the PROC key and select the “VOR 22” 

approach. 

3.   From  the  transitions  window,  select “VEC-

TORS”.