Справочник Пользователя для Garmin gns 500w

98

190-00356-00 Rev E

Vectors-To-Final Approach

4.   Select “Load?” (or “Activate?”, if already on 

vectors-to-final). 

1.   Select Billard Municipal (KTOP) as your desti-

nation, using the direct-to key or as the last 
waypoint in a flight plan. 

2.   Press the PROC key and select the “VOR 22” 

approach. 

3.   From the transitions window, select “LEBVY” 

as the IAF. Also, select “Load?”. 

4.   When cleared, press the PROC key and select 

“Activate Vector-To-Final?”. 

With “vectors to final” selected, the CDI needle

will remain off center until you’re established on the 
final approach course. With the approach activated, 
the map page will display an extension of the final 
approach course in magenta (remember, magenta is 
used to depict the active leg of the flight plan) and 
“VTF” will appear as part of the active leg on the
default NAV page (as a reminder that the approach was 
activated with vectors-to-final). In this example, we’ll 
assume ATC vectors result in a rectangular course to 
intercept final, as follows: 









 

1.   When VTF is activated, the 400W-series unit 

switches to approach mode and course guid-
ance is given along the final approach course. 
CDI full-scale deflection is as shown in Appen-
dix C.