Справочник Пользователя для Garmin gns 500w

32

190-00356-00 Rev E

You can also quickly return all data field settings to 

their original factory settings. 

1.   Starting with the default NAV page, press the 

MENU key to display an options menu. 

2.   Turn  the  large  right  knob  to  highlight  the 

“Restore Defaults?” option and press ENT. 

A “Crossfill?” option is provided from the Default

NAV Page. This option allows you to transfer a direct-
to destination, the active flight plan including VNAV
parameters, any stored flight plan or user waypoints to 
a second 400W or 500W-series Garmin unit. 

See Section 9 - Aux Pages - Flight Planning - 

Crossfill Operation for additional details on using the 
“Crossfill?” option. 

 

NOTE: The databases of the 400/500 series and 
the 400W/500W are incompatible so you may not 
mix systems. 

The second NAV page is the map page, which dis-

plays your present position using an airplane symbol, 
along with nearby airports, navaids, user-defined 
waypoints, airspace boundaries, lakes, rivers, high-
ways and cities. 

 

NOTE: The electronic chart is an aid to navigation 
and is designed to facilitate the use of authorized 
government charts, not replace them. Land and 
water data is provided only as a general reference 
to your surroundings. The positional accuracy 
of the land and water data is not of a precision 
suitable for use in navigation and it should not 
be used for navigation. Only official government 
charts and notices contain all information needed 
for safe navigation – and, as always, the user is 
responsible for their prudent use. 

 

NOTE: If the 400W-series unit is unable to 
determine a GPS position, the present position 
(airplane) symbol will appear on the Map Page in 
yellow. No symbol will be present when there is 
no active flight plan.

Map Page