Справочник Пользователя для Lucent Technologies P333T
Chapter 4
Installation and Setup
Cajun P333T User’s Guide
19
Configuring the Switch
The Cajun P333T may be configured using the text-based “Command Line
Interface” (CLI) utility, the stand-alone Cajun P330 Manager or CajunView.
Interface” (CLI) utility, the stand-alone Cajun P330 Manager or CajunView.
For instructions on the text-based utility, see the CLI chapter.
For instructions on installation of the graphical user interfaces, refer to the “Cajun
P330 Manager” appendix. For instructions on the use of the graphical user
interfaces, refer to the Manager User’s Guide on the Management CD.
P330 Manager” appendix. For instructions on the use of the graphical user
interfaces, refer to the Manager User’s Guide on the Management CD.
Cajun P330 Default Settings
The default settings for the Cajun P330 switch and its ports are determined by the
Cajun P330 software. These default settings are subject to change in newer versions
of the Cajun P330 software. See the Release Notes for the most up-to-date settings.
Cajun P330 software. These default settings are subject to change in newer versions
of the Cajun P330 software. See the Release Notes for the most up-to-date settings.
Switch Settings
Table 4.1
Default Switch Settings
Function
Default Setting
Cajun P330 IP Address
149.49.32.134
Default Gateway
0.0.0.0
VLANs
VLAN 1
Spanning Tree
Enabled