Справочник Пользователя для Gary Fisher 2004 gary fisher bicycles

CHAPTER THREE

Inspection, Adjustment & Lubrication

Redundant retention washers

For the front wheel of children's bikes and BMX

bikes with axle nuts, a special toothed washer must

be in place on both sides of the hub for correct

wheel retention. The toothed washer is placed on

the outside of the fork tip with the tooth in the

corresponding hole in the fork tip (Figure 3.8.11).

Tricycle wheel retention

On a tricycle front wheel, make sure the axle

clamp bolts (Figure 3.8.12) on both sides of the

fork are tight:

• Front wheel: 150-280 lb•in (17-20.3 Nm).

Adjusting tire pressure

If you cannot keep the proper pressure in a tire,

it probably has a leak in the tube. The section on

pages 69-71,

Tire Installation,

includes instructions

to fix the tube leak. If you do not have the proper

tools, take the bike to your Gary Fisher dealer for

repair.

Wheels

Figure 3.8.11 Toothed washer

Toothed

washer

Figure 3.8.12 Tricycle front
wheel clamp bolt

Clamp bolt

Wheel removal and installation, for bikes with a rear

derailleur

These instructions explain how to remove and install a wheel.

For some parts of these procedures, the instructions refer you

to information already covered earlier in the

Wheels

and

Brake

Systems

sections of this chapter.

Note: For rear wheels with internal brakes, or coaster brakes, follow the
instructions

To remove the rear wheel

for that brake type in the

Brake Systems

section.