Справочник Пользователя для Dukane 403-575-00

Servo Welder

Servo Step 1 - Read Section 3,

 of the iQ Explorer User's Manual 

403-579-00.  Insure that proper connection of the iQ 

Explorer software and the servo press are in place.

See Figure 4-5 below.
It is important that you understand and familiarize your-

self with the operation and navigation of the iQ Explorer 

user interface software. Be familiar with iQ Explorer 

User's Manual - Section 4, Operation. 

Icon indicates 

connection has 

been made.

Name of the connected welder.

 

iQ Explorer, Start-up

 

iQ Explorer, Start-up, Hardware Tab

Servo Step 2 - Hardware Tab

 

After moving to the Hardware tab, click on the Setup 

File Name

 box, and select an unused setup. This will 

ensure that you do not overwrite a pre-existing setup.
See Figure 4-6 below.

Hardware Tab

Pneumatic Welder 

Dukane iQ Explorer - [Welder 1- Setup 4]

Dukane iQ Explorer - [Welder 1]