Справочник Пользователя для Metra Electronics 99-5500

Скачать
Страница из 4
3
4
Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Open 
the ashtray and remove (2) screws exposed.  
Unclip the dash trim bezel and remove the 
radio dummy plate.  Place (4) U-nuts over 
the mounting positions in the sub-dash.
1
FORD Crown Victoria  1984-90                               
MERCURY Grand Marquis  1984-90
2
Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Remove 
(3) screws from the lower edge of the dash 
trim bezel.  Remove (2) screws above the 
radio opening.  Unsnap the right corner of 
the dash trim bezel, disconnect the cigarette 
lighter wiring and remove the bezel.  
Remove the screws securing the factory 
head unit and disconnect the wiring.
1
FORD Econoline  1975-91
2
Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Remove 
(4) screws from the top edge of the radio trim 
bezel.  Remove (2) screws from the bottom 
edge of the radio trim bezel.  Remove the 
climate control knobs and unclip the bezel.  
Remove (4) screws securing the factory 
head unit and disconnect the wiring.
FORD Escort / MERCURY Lynx  1985-90
2
1
Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Remove 
the ashtray and climate control knobs.  
Remove (2) screws from the bottom of the 
dash trim bezel.  Lift up on the bottom of the 
bezel and remove.  Remove the screws 
securing the factory head unit and 
disconnect the wiring.
1
FORD LTD / MERCURY Marquis  1983-86
2
Mount  Bracket Set #1 to the Radio 
Housing
 with (4) 3/8" Phillips Flat-head 
Screws
 and (4) Nuts supplied.   Skip to the 
Installation Instructions for ALL VEHICLES 
on Page #7.
Mount  Bracket Set #2 to the Radio 
Housing
 with (4) 3/8" Phillips Flat-head 
Screws
 and (4) Nuts supplied.   Skip to the 
Installation Instructions for ALL VEHICLES 
on Page #7.
Mount  Bracket Set #4 to the Radio 
Housing
 with (4) 3/8" Phillips Flat-head 
Screws
 and (4) Nuts supplied.   Skip to the 
Installation Instructions for ALL VEHICLES 
on Page #7.
Mount  Bracket Set #1 to the Radio 
Housing
 with (4) 3/8" Phillips Flat-head 
Screws
 and (4) Nuts supplied.   Skip to the 
Installation Instructions for ALL VEHICLES 
on Page #7.