Справочник Пользователя для Metra Electronics 99-7892
10
1
Disconnect the negative battery terminal to
prevent an accidental short circuit. Unclip
the radio trim bezel and disconnect the clock
and climate control wiring. Remove (2)
8mm hex-head screws securing the factory
head unit and disconnect the wiring.
prevent an accidental short circuit. Unclip
the radio trim bezel and disconnect the clock
and climate control wiring. Remove (2)
8mm hex-head screws securing the factory
head unit and disconnect the wiring.
Mount the Rear Support Bracket to the back of the pocket with (2) Phillips Screws supplied.
Skip to the Installation Instructions for ALL VEHICLES on Page #11.
Skip to the Installation Instructions for ALL VEHICLES on Page #11.
ISO-DIN HEAD UNITS: Mount the Rear Support Bracket to the back of the pocket with (2)
Phillips Screws supplied. Skip to the Installation Instructions for ALL VEHICLES on Page
#11.
Phillips Screws supplied. Skip to the Installation Instructions for ALL VEHICLES on Page
#11.
ACURA CL 1997-99
1
3
3
2
Cut and remove the SIDE clips from the
Radio Housing.
Radio Housing.
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove (2)
8mm screws under the glove box. Remove (1)
Phillips screw on the glove box arm and remove
the box. Remove (2) Phillips screws exposed in
the glove box cavity. Remove (2) Phillips screws
below the storage box door (under the ashtray).
Remove (2) screws from the left side of the dash
console. Remove (1) Phillips screw from the coin
tray. Remove (1) Phillips screw under the
ignition. Remove (4) Phillips screws securing the
factory cupholder. Remove (2) 8mm hex-head
screws from the rear support bracket and
disconnect the wiring.
prevent an accidental short circuit. Remove (2)
8mm screws under the glove box. Remove (1)
Phillips screw on the glove box arm and remove
the box. Remove (2) Phillips screws exposed in
the glove box cavity. Remove (2) Phillips screws
below the storage box door (under the ashtray).
Remove (2) screws from the left side of the dash
console. Remove (1) Phillips screw from the coin
tray. Remove (1) Phillips screw under the
ignition. Remove (4) Phillips screws securing the
factory cupholder. Remove (2) 8mm hex-head
screws from the rear support bracket and
disconnect the wiring.
HONDA Odyssey 1995-98 / ISUZU Oasis 1996-99
2
1
Cut and remove the TOP clips from the
Radio Housing.
Radio Housing.