Справочник Пользователя для Metra Electronics 99-7892

Disconnect the negative battery terminal to 
prevent an accidental short circuit.  Remove 
(3) screws from each side of the center 
console and remove the console.  Remove 
(2) screws securing the factory head unit to 
the sub-dash support bracket.  Slide the 
head unit/pocket assembly out and 
disconnect the wiring.

ACURA Integra  1990-93

Disconnect the negative battery terminal to prevent an accidental short circuit.  Remove the 
ashtray and (1) ¾" #8 Phillips screw exposed.  Open the storage compartment and remove (2) 
#8 Phillips screws exposed.  Remove the cupholder tray and (3) #8 Phillips screws inside.   Lift 
the center console out and remove (2) Phillips screws exposed at the base of the dash trim 
bezel.  Unclip the bezel and remove.   Remove (2) hex-head screws securing the factory head 
unit and disconnect the wiring.

HONDA Accord  1994-97

Mount the Rear Support Bracket to the back of 
the pocket with (2) Phillips Screws supplied.   
Skip to the Installation Instructions for ALL 
VEHICLES on Page #11.

Cut and remove the SIDE clips from the 
Radio Housing.

Cut and remove the TOP clips from the 
Radio Housing.  

ISO-DIN HEAD UNITS:  Mount the  Rear Support Bracket to the back of the pocket with (2) 
Phillips Screws supplied.  Skip to the Installation Instructions for ALL VEHICLES on Page 
#11.