Справочник Пользователя для KVH Industries kvhtracvision g4

Optional Rotating Card Display

54-0147

The optional rotating card display presents true or magnetic
heading using a compass card rotating under a fixed lubber line,
with user-selectable red or green backlighting.

Dimensions

5.6" (142 mm) x 5.6" (142 mm) x 3" (76 mm)

Weight

39 oz (1110 gm)

The rotating card display may be mounted either of two ways:

Option 1 - Free-standing on its Bracket 

Option 2 - Flush with the Panel

Templates for either method are provided at the end of this
appendix. The unit should be located no closer than 36" (1 m) to
any magnetic compass. Before installing, remove the display unit
from its stand by removing the latch knobs on either side.

1. Select a site with room for the unit to rotate in its

bracket. Using Template E-1, mark and drill four

1

⁄

4

" (6 mm) holes in the mounting surface. Fasten

the bracket in place with the screws provided.

2. Reattach the display unit to the bracket

temporarily. Skip to Section E.3, “Wiring the
Rotating Card Display” on the following page.