Справочник Пользователя для Juniper Networks T1600

Скачать
Страница из 113
Circuit cross-connect for leveraging ATM access networks
User-configurable virtual circuit (VC) and virtual path (VP) support
Support for idle cell or unassigned cell transmission
OAM fault management processes alarm indication signal (AIS), remote defect indication
(RDI), and loop cells
Point-to-point and point-to-multipoint mode Layer 2 counters per VC and per VP
Local and remote loopback
ATM Inverse ARP, which enables routers to automatically learn the IP address of the
router on the far end of an ATM PVC
Simple Network Management Protocol (SNMP):
Management Information Base (MIB) 2 (RFC 1213)
ATM MIB (RFC 1695)
SONET MIB
Unspecified bit rate (UBR), non-real-time variable bit rate (VBR), and constant bit rate
(CBR) traffic shaping
Per-VC or per-VP traffic shaping
Support for F4 OAM cells
Support for 16-bit VCI range
Software features
Duplex SC/PC connector (Rx and Tx)
Optical interface support—See Table 16 on page 24
Cables and connectors
One tricolor per port:
Off—Not enabled
Green—Online with no alarms or failures
Amber—Online with alarms for remote failures
Red—Active with a local alarm; router has detected a failure
LEDs
Alarm indication signal (AIS-L, AIS-P)
Bit error rate signal degrade (BERR-SD), bit error rate signal fail (BERR-SF)
Bit interleaved parity errors B1, B2, B3
Errored seconds (ES-S, ES-L, ES-P), far-end bit errors REI-L, REI-P (CV-LFE, CV-PFE),
far-end errored seconds (ES-LFE, ES-PFE), far-end severely errored seconds (SES-LFE,
SES-PFE), far-end unavailable seconds (UAS-LFE, UAS-PFE)
Loss of cell delineation (LOC), loss of frame (LOF), loss of pointer (LOP-P), loss of signal
(LOS)
Payload mismatch (PLM-P), payload unequipped (UNEQ-P)
Remote defect indication (RDI-L, RDI-P)
Severely errored framing (SEF), severely errored framing seconds (SEFS-S), severely
errored seconds (SES-S, SES-L, SES-P), unavailable seconds (UAS-L, UAS-P)
Alarms, errors, and
events
Table 16: Optical Interface Support for ATM2 OC12/STM4 IQ PICs
Multimode Transceiver
Intermediate Reach (IR) Transceiver
Parameter
Multimode
Single-mode
Optical interface
Fixed
Fixed
Transceiver type
24
ATM2 OC12/STM4 IQ PICs
T1600 Internet Routing Node PIC Guide