Справочник Пользователя для Crestron av2 pro2

Crestron AV2 & PRO2 

  2-Series Integrated Dual Bus Control System

•  Use the Address Book in the Crestron Toolbox to create an entry for the 

AV2 or PRO2 with the AV2’s or PRO2’s TCP/IP communication 
parameters. 

•  Display the “System Info” window (click the 

 icon) and select the AV2 

or PRO2 entry. 

•  Use the Crestron Toolbox to create the AV2 or PRO2 IP table. 

Select Functions | IP Table Setup. 

⇒ 
⇒ 

⇒ 

⇒ 
⇒ 

⇒ 

⇒ 

Either add, modify, or delete entries in the IP table. The AV2 or 
PRO2 can have only one IP table entry. 

A defined IP table can be saved to a file or sent to the device. 

•  When using the AV2 or PRO2 as a “slave”, edit the “master” control 

system’s IP table to include an entry for the slave AV2 or PRO2. The entry 
should list the AV2 or PRO2’s IP ID (specified on the AV2’s or PRO2’s IP 
table) and the internal gateway IP address 127.0.0.1. 

•  Display the network device tree (Tools | Network Device Tree) to show all 

network devices connected to the control system. Right-click on the AV2 or 
PRO2 to display actions that can be performed on the AV2 or PRO2: 

Upgrade firmware 

Change Net ID 

•  Upload the SIMPL Windows file to the control system using SIMPL 

Windows or Crestron Toolbox. 

•  Upgrade AV2 & PRO2 firmware via Crestron Toolbox. 

Establish serial or TCP/IP communications with the AV2 or PRO2 
and display the “System Info” window. 

Select Functions | Firmware… to upgrade the AV2 or PRO2 
firmware. 

For details on uploading and upgrading, refer to the SIMPL Windows help file or the 
Crestron Toolbox help file. 

 

•  17