Справочник Пользователя для Crestron pac2

Crestron PAC2 

 

Professional Automation Computer

f.  Reinitialize the unit by recycling the power or pressing the HW-R 

button. If the connection is established, the Viewport console 
should display some text and the PAC2> prompt. 

g.  If communication still cannot be established, contact Crestron 

customer service. 

NOTE:  In Viewport, you can generate an error log via the ERRlog console 
command. For more information on console commands, refer to the 2-Series Console 
Commands Reference Guide, (latest version of Doc. 6002) available from the 
Download | Product Manuals section of the Crestron website (

www.crestron.com

). 

After you have completed your D3 Pro lighting system program, you must first 
compile the program and then upload it to the PAC2. 

Click the Build System 

 button to generate the touchpanel projects and control 

system logic program. Here D3 Pro will begin by generating any touchpanel projects 
that have not already been compiled, and the Touchpanel Build Status pane will 
display information about the project, as in Programming View. However, D3 Pro 
will not automatically open the VisionTools



 Pro-e (VT Pro-e) project. 

After all the touchpanel projects are created, D3 Pro will generate the PAC2 logic 
program. A progress bar will display information about the program as it is created 
and compiled. 

 

Click Continue to finish the compile operation and upload the system. 

The program will be saved as an SMW file in the Program subfolder, and will 
contain all the logic that enables communication between the control system, 
interfaces, controlled devices and other hardware. 

•  23