Справочник Пользователя для Crestron pac2

Crestron PAC2 

 

Professional Automation Computer

 

With TCP/IP, type the IP address of the PAC2. 

If the panel is connected directly to a COM port on the PC, select Serial as 
the connection type and check Send directly to touchpanel.  

To communicate directly to an Ethernet touchpanel, select TCP/IP as the 
connection type, enter the IP address of the panel (not the PAC2) and select 
Send directly to touchpanel. 

3. Click 

Upload to begin the file transfer. If the control system already has a 

program installed in memory, you will be prompted to save that program to 
disc. To save the program, click Yes and browse to the directory where you 
want to save the SPZ file. 

As files are transferred, first to the control system and then to touchpanels, 
D3 Pro will display a progress bar. 

In applications that do not include wireless panels, D3 Pro will display the 
progress bar as it uploads each project to every selected touchpanel. In 
applications that do include wireless panels, D3 Pro will interrupt the 
upload process and prompt you to select the NET ID of the wireless panel. 
This is the temporary Cresnet ID that is used solely for uploading, and is not 
used during normal program operation. 

4.  After transfer, D3 Pro will display information about each file, including the 

filename and status, i.e., successful or not successful. If any file to be 
transferred matches what is currently in the device, the Status field will 
display the message: "No need to upload." 

After you have completed your SIMPL Windows program you must compile and 
upload the program to the PAC2.  

To compile the program, simply click the Convert/Compile button 

 on the 

SIMPL Windows toolbar, or select Project | Convert/Compile (you can also press 
F12). A status bar will indicate the progress of the compile operation. After the 
operation is complete, a window will display information about the program such as 
the number and type of signals, and memory usage. 

The compiled program will be stored as an SPZ file in the same directory as the 
source file. There are a number of ways to upload an SPZ file to the PAC2. When 
any of the options is selected, a “Send Program” window appears (refer to graphic on 
next page). 

•  25