Справочник Пользователя для Cadillac catera 2001

Скачать
Страница из 328
2-63
Programming the Sunroof
If the battery on your vehicle has been recharged,
disconnected or is not working, you will need to
reprogram the sunroof following these steps. Refer to
the illustration under “Sunroof” for knob positions.
With your vehicle’s ignition on:
1. If the sunroof is closed, turn the knob to 
position “E.” Hold the knob in position for 
about five seconds.
If the sunroof is open, turn the knob to E and 
hold until the glass panel has closed. Now 
continue holding the knob for approximately 
five more seconds.
2. Turn the knob to position “G” and hold until the
sunroof is fully tilted (about three seconds after the
motor has stopped).
3. Now turn the knob to position E and keep holding
until the sunroof is fully closed (about three seconds
after the motor has stopped).
4. Turn the knob to position“A” and hold until the
sunroof is fully open (about three seconds after the
motor has stopped).
5. Turn the knob to position E and keep holding 
the knob until the sunroof has fully closed 
(about three seconds after the motor has stopped).
The sunroof is now programmed.
If the sunroof keeps opening after you attempt to close 
it once it has been programmed, you will need to repeat
Steps 2 through 5 (up to three times if needed). 
If you are still having problems, consult your dealer 
for service.
Also keep in mind that if something is in the way of the
sunroof closing during programming and you continue
to program the sunroof, the sunroof will only open or
close to the spot where the obstruction occurred. You
will need to reprogram the sunroof again, making sure
that the object has been removed.