Справочник Пользователя для Bay Technical Associates BayTech DS72
DS72 Host Module
14
Configuration Menu
The configuration menu allows the admin user to choose a module to access and edit its configuration.
The following pages define each line of the configuration menu.
The following pages define each line of the configuration menu.
Enter the number that corresponds with the Host Module followed by a <cr> and the Host Module
responds without the option description:
responds without the option description:
Configuration Status
Used to view the status of the installed modules, network setup, login setup, and associated
information by issuing a series of carriage returns. The following are the factory
information by issuing a series of carriage returns. The following are the factory
default settings:
Copyright(C) Bay Technical Associates 1999
DS72 Data Switch Series - Telnet Host Module
Revision F.3.21.4 Kernel K.1.01H
Core C.1.00N Hardware H.2.01
Module 2
DS72 Data Switch Series - Telnet Host Module
Revision F.3.21.4 Kernel K.1.01H
Core C.1.00N Hardware H.2.01
Module 2
Status..........................1 Current status of DS72 module
Serial Port Configuration.......2 Change port config, 9600, 8, 1, none
Port Device Name................3 Change the name of the module port
Attention Character.............4 (;;;;;) get Main Menu
Disconnect Timeguard............5 Delay to see if more data after ‘;’ char
Connection Override.............6 User override another for priority
Connect Port ID Echo............7 Enable echo module & port#, device name
Login Setup.....................8 Manage User, Port, Header
SNMP Configuration..............9 Trap Address, Read/Write, Enable/Disable
Network Port Configuration......10 Ethernet configuration menu
Unit ID.........................11 Name of the module
Upgrade Firmware................12 FTP-Firmware upgrade w/user password
Active Restore..................13 Allow units to internally reset for
Serial Port Configuration.......2 Change port config, 9600, 8, 1, none
Port Device Name................3 Change the name of the module port
Attention Character.............4 (;;;;;) get Main Menu
Disconnect Timeguard............5 Delay to see if more data after ‘;’ char
Connection Override.............6 User override another for priority
Connect Port ID Echo............7 Enable echo module & port#, device name
Login Setup.....................8 Manage User, Port, Header
SNMP Configuration..............9 Trap Address, Read/Write, Enable/Disable
Network Port Configuration......10 Ethernet configuration menu
Unit ID.........................11 Name of the module
Upgrade Firmware................12 FTP-Firmware upgrade w/user password
Active Restore..................13 Allow units to internally reset for
freezes, login idle timeouts,
RPC Management..................14 Set thresholds temp/v/c
Exit............................X,CR
Enter Request :1
Exit............................X,CR
Enter Request :1
Configuration
DS72 ................1 Host Module
DS74 Module# 3 ................2 I/O Serial port
DS-RPC ................3 Assign users, outlet name, E/D
confirmation/status
DS72 ................1 Host Module
DS74 Module# 3 ................2 I/O Serial port
DS-RPC ................3 Assign users, outlet name, E/D
confirmation/status
menu,
unit
id,
alarm set.
Exit............................X,CR