Справочник Пользователя для Brother Fax-885MC

      M E S S A G E   C E N T E R

You can retrieve the Memory Status List from a remote fax machine to see if you have 
any fax messages.

Dial your fax number.

When you hear the beep, immediately enter your Remote Retrieval Access Code 
(1 5 9 ).

When you hear two short beeps, use the dial pad to press 9 6 1.

Using the dial pad, enter the number of the remote fax machine (up to 20 digits) where 
you want the Memory Status List forwarded followed by # #.

After you hear your fax machine beep, hang up and wait.

Your fax machine calls the remote fax machine.  The remote fax machine prints the 
Memory Status List.

1 Memory Status List

Enter the number of a remote fax machine to 
receive a report or stored fax messages. (See 
page 9-11.)

2 Retrieve all faxes

3 Erase fax in the memory

If you hear one long beep, you can erase the fax 

message from the memory.

You can check whether your fax machine has 
received any FAX or VOICE messages. If yes, 
you will hear one long beep. If no, you will 
hear three short beeps.

1 FAX

2 VOICE

If you hear one long beep, you can change the 
answer mode. If you hear three short beeps, 
you cannot change it. (Example: There is no 
MSG CTR OGM when you want to change to 
MSG CTR mode.)

1 MSG CTR

2 FAX/TEL

3 FAX ONLY

After a long beep, you can exit Remote 
Retrieval.

You can not use 

 or  # as dial numbers. However, if you want to store a pause, 

press #.