Справочник Пользователя для Dodge en310

 

 

 

To move the damper blades without power present, 
do the following: 

1.  Hold down the PUSH button. 

2.  Make adjustments to the damper position. 

3. Release 

the 

PUSH button. 

NOTE:  If there is no load, the actuator will hold the 

new damper position. If load conditions 
exist, the actuator might not be able to 
hold. 

Once power is restored, the actuator returns to 
automated control. 

 

EA0666R1

EA0686R1

The angular rotation is adjustable between 0° and 
90° at 5-degree intervals. 

1.  Loosen the shaft adapter from the damper shaft 

and remove the actuator from the damper shaft. 

2.  Remove the clip and shaft adapter from the 

actuator. See Figure 9. 

 

3.  Return the actuator gear train to the "0" position 

using the steps which follow for the clockwise or 
counterclockwise damper shaft rotation. 

a.  Insert the shaft adapter to the right as close as 

possible to the raised stop. Figure 10. 

EA0674R1

 

b.  Hold down the PUSH button and rotate the shaft 

adapter to the left until it stops. Figure 11. 

EA0675R1

 

c. Release 

the 

PUSH button. 

d.  If the shaft adapter is not resting against the left 

raised stop, remove the adapter and insert it 
against the left stop.  

e.  Place the position indicator to the "0" position on 

the outside scale. Figure 12. 

a.  Insert the shaft adapter to the left as close as 

possible to the raised stop. 

b.  Hold down the PUSH button and rotate the shaft 

adapter to the right until it stops.  

c. Release 

the 

PUSH button. 

d.  If the shaft adapter is not resting against the 

right raised stop, remove the adapter and insert 
it against the right stop.  

e.  Place the position indicator to “0” on the inside 

scale. 

UL Doc. No. 129-272 

EAI/EN-4 

Dodge Engineering & Controls, Inc. 

Rev. 5, Jan., 2005