Справочник Пользователя для National Instruments FP-3000
Appendix C
Fieldbus Parameters
C-22
©
National Instruments Corporation
UPDATE_EVT
The current state of the update event, along with a time and date stamp. This
event is issued whenever a static parameter is changed and
event is issued whenever a static parameter is changed and
ST_REV
is
incremented.
WRITE_ALM
The current state of the low alarm, along with a time and date stamp.
WRITE_LOCK
The software write lock for the device. When this is set to true, writes to all
configuration parameters of all blocks are disallowed. The
configuration parameters of all blocks are disallowed. The
WRITE_ALM
block alarm is active when writes are allowed and clear when they are
disallowed.
disallowed.
WRITE_PRI
The priority of the write alarm.
XD_SCALE
The scaling parameter used to interpret values from the physical I/O
channel. This is used to translate from a physical transducer value to a
percent of scale.
channel. This is used to translate from a physical transducer value to a
percent of scale.
Table C-16. Scaling Parameter Values
Subfield
Meaning
EU_100
Engineering units value at 100 percent of scale.
EU_0
Engineering units value at zero percent of scale.
UNIT_INDEX
Actual engineering units code (such as mA).
DECIMAL
Number of digits a host shows to the right of the
decimal for display purposes.
decimal for display purposes.