Справочник Пользователя для National Instruments USB-9221
USB-9201/9221 User Guide and Specifications
4
ni.com
Software
Software support for the USB-9201/9221 is provided by NI-DAQmx.
The NI-DAQmx CD contains example programs that you can use to get
started programming with the USB-9201/9221. Refer to the NI-DAQmx for
USB Devices Getting Started Guide that shipped with your device, and is
also accessible from Start»All Programs»National Instruments»
NI-DAQ, for more information.
started programming with the USB-9201/9221. Refer to the NI-DAQmx for
USB Devices Getting Started Guide that shipped with your device, and is
also accessible from Start»All Programs»National Instruments»
NI-DAQ, for more information.
Installing the USB-9201/9221
Installing the Software
Before installing the device, you must install the software you plan to use
with the device. Refer to the Software section of this guide and the
NI-DAQmx for USB Devices Getting Started Guide that shipped with your
device, and is also accessible from Start»All Programs»National
Instruments»NI-DAQ, for more information.
with the device. Refer to the Software section of this guide and the
NI-DAQmx for USB Devices Getting Started Guide that shipped with your
device, and is also accessible from Start»All Programs»National
Instruments»NI-DAQ, for more information.
Installing the NI 9201/9221 in the USB-9162 Carrier
The NI 9201/9221 module and the USB-9162 carrier are packaged
separately. Refer to Figure 2, while completing the following assembly
steps:
separately. Refer to Figure 2, while completing the following assembly
steps:
1.
Make sure that no signals are connected to the NI 9201/9221 module
and that the USB cable is not connected to the device.
and that the USB cable is not connected to the device.
2.
Remove the protective cover from the 15-pin DSUB connector.
3.
Align the I/O module with the carrier, as shown in Figure 4.