Справочник Пользователя для Fujitsu ScanSnap S510M

ScanSnap S510M Getting Started

 

28

This chapter describes common problems during the usage of the ScanSnap and how to remedy them.

1. Remove the document on the paper chute.
2. Open the ADF while pulling the cover open lever.
3. Remove the jammed document.
4. Close the ADF.

⇒

You should hear the ADF click when it returns to its original position. 

Before you ask for repair service, please check the following items.
If you cannot solve the problem even after checking the following items, contact the store where you 
purchased the ScanSnap, or contact an authorized FUJITSU scanner service provider.

For troubleshooting errors caused during operation, refer to "7.2 Troubleshooting Checklist" of 

"ScanSnap S510M Operator’s Guide."

* Visit our Web site for your reference. Other useful information will be posted on the FAQ 

corner at the following Web site: 

http://scansnap.fujitsu.com/

The ScanSnap 

cannot be turned 

on.

Is the power/USB cable connected 

correctly?

Correctly connect the power/USB cable.
Disconnect and then re-connect the power  

cable.

(Note: Wait at least five seconds before 

reconnecting the power cable.)

Is the paper chute closed? 

(The ScanSnap is automatically 

powered on/off when the paper 

chute is opened/closed.)

Open the paper chute.

Is the Mac OS X started 

completely? (The ScanSnap is 

powered on/off in conjunction with 

the computer.)

Wait until Mac OS X is started up completely. 
The    LED stays out while Mac OS X is 

starting up or in the sleep mode.

Click!