Справочник Пользователя для Frigidaire fafs4073na

Скачать
Страница из 32
28
SOLUTIONS TO COMMON PROBLEMS
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
PREVENTIVE MEASURES
Residue stains / 
buildup, mold or 
mildew stains in 
gasket
•  Moisture in the washer.
•  Use of non-HE detergent.
• Overdosing detergent.
•  Overloading wash drum.
•  Leaving a wet load set in 
washer.
•  Cold water washes which 
may not completely dissolve 
and remove detergents.
•  Perform SYSTEM CLEAN 
cycle
•  Scrub gasket with Comet™ 
Spray Gel Mildew Stain 
Remover using brush to 
remove stains.
•  Use only HE (high effi ciency 
detergent) along with rec-
ommended dosage.
•  Remove wash load immedi-
ately upon cycle completion.
• Run dehumidifi er in laundry 
room.
• Avoid overfi lling detergent 
and fabric softener compart-
ments of dispenser.
•  Dry the inside of washer 
and gasket after every run.
Residue stains 
/ buildup, mold 
or mildew stains 
in dispenser 
drawer
•  Moisture in the washer.
•  Use of non-HE detergent.
• Overdosing detergent.
•  Remove dispenser drawer 
and wipe dispenser and 
inserts with combination of 
¾ cup liquid chlorine bleach 
and one gallon hot water. 
Rinse well, and repeat if 
necessary. Return drawer to 
location. NOTE: Wear rub-
ber of latex gloves. Protect 
fl oor and clothing from 
bleach damage.
•  Use only HE (high effi ciency 
detergent) along with rec-
ommended dosage.
• Avoid overfi lling detergent 
and fabric softener compart-
ments of dispenser.
Water in fold of 
fl exible gasket
•  Result of washing and part 
of normal operation.
•  At the end of each wash, 
dry inside of gasket fold 
with clean dry towel all 
around gasket.
Odor
•  Moisture in the washer.
•  Use of non-HE detergent.
• Overdosing detergent.
•  Leaving a wet load remain 
in washer.
•  Cold water washes which 
may not completely dissolve 
and remove detergents.
•  Perform SYSTEM CLEAN 
cycle.
•  At the end of each wash, 
dry inside of gasket fold 
with clean, dry towel all 
around gasket. 
•  Use only HE (high effi ciency 
detergent) along with rec-
ommended dosage.
•  Remove wash load immedi-
ately upon cycle completion.
•  Pour one cup liquid chlorine 
bleach in standpipe; let 
remain a day and fl ush with 
water.
•  Leave door and dispenser 
drawer open for a few 
hours after use or whenever 
washer is not in use.
Common Washing Problems, continued