Справочник Пользователя для National Instruments NI USB-5133 OEM

© National Instruments Corporation

To modify the device name in the Found New Hardware Wizard and 
Windows Device Manager in Microsoft Windows Vista/XP, complete the 
following steps.

You must have NI-SCOPE 3.4 or later installed on your PC.

1.

Locate the 

NIHSD2k.inf

 file in the 

y:\WINDOWS\inf\

 directory, 

where 

y:\

is the root directory where Windows is installed.

If you want to revert back, save a copy of this file as 

NIHSD2k_original.inf

 in a different location.

2.

Edit the device INF file by opening 

NIHSD2k.inf

 with a text editor. 

At the bottom of this file are the descriptors where Windows looks to 
identify the device. Locate the four lines of text that contain in quotes 
the descriptors for the device name you are modifying. Change the 
descriptor on all lines to the new device name, as shown in Figure 5.

Figure 5.  INF File Descriptors Changed to “My Device” (Windows Vista/XP)

3.

Save and close the INF file.

4.

Go to the Windows Device Manager.

 In the Device Manager, notice that the OEM device 

now appears as 

My Device

, as shown in Figure 6.

 In the Device Manager, right-click the OEM device under 

Data Acquisition Devices, and select Uninstall. Power down the OEM 
device and disconnect the USB cable from your PC.

Original File

Modified File