Справочник Пользователя для Crestron aae aaei

Audio Expander 

 

Crestron Adagio™ AAE

When wiring the network, consider the following:  

•  Use Crestron Certified Wire. 
•  Use Crestron power supplies for Crestron equipment. 
•  Provide sufficient power to the system. 

CAUTION:  Insufficient power can lead to unpredictable results or damage 
to the equipment. Please use the Crestron Power Calculator to help calculate 
how much power is needed for the system 
(

http://www.crestron.com/calculators

).

 

•  For larger networks, Use a Cresnet Hub/Repeater (CNXHUB) to maintain 

signal quality 

For more details, refer to “Check Network Wiring” on page 13.  

The Net ID of the Adagio AAE Audio Expander has been factory set to 31. The Net 
IDs of multiple Audio Expanders in the same system must be unique. Net IDs are 
changed from a personal computer (PC) via the Crestron Toolbox. When setting the 
Net ID, consider the following:  

•  The Net ID of each unit must match an ID code specified in the SIMPL 

Windows program. 

•  Each network device must have a unique Net ID. 

For more details, refer to the Crestron Toolbox help file.  

Make the necessary connections as called out in the illustration that follows this 
paragraph. Refer to “Network Wiring” on page 6 before attaching the 4-position 
terminal block connector. Apply power after all connections have been made. 

When making connections to the Adagio AAE Audio Expander, consider the 
following: 

•  Use Crestron power supplies for Crestron equipment. 

 

•  Audio Expander: Adagio AAE