Справочник Пользователя для silent-knight regency 4720c-commercial

The warning tone will stop as soon as you enter the first digit of your access
code,  allowing you to clearly hear the beeps as you finish entering your
code.  The LCD will show the number of seconds until the system does into
alarm if not disarmed.

The ARMED light will go off, and the READY light will go back on.

If you do not want the chime zones to sound, press the 

CHM

 or 

INT

button to turn off the CHIME and INTERIOR LEDs, if needed.

If the LCD reads NOT READY and the touchpad READY light is off, there
is a Not Ready condition.  This typically means that one or more of your
building's zones are not prepared for system arming (for example, a door is
ajar or a window is left open).  Before you can arm the system, you must
identify and correct the Not Ready condition.

To do this, press the 

STAT

 button and the LCD will display the zone

number and location of the open sensor (for example, 3 BACK DOOR).
Close the door involved and the unit will automatically indicate a ready
status (READY light is on).

If the display reads TROUBLE, press the 

STAT

 button and the display will

list the trouble conditions (see page 24).

When an alarm occurs, the touchpad displays ALARM on the first line of

the LCD.  Press 

MEM

 to view the location of the alarm.

When a system trouble or sprinkler supervisory condition occurs, the
touchpad will beep and display TROUBLE or SUPERVISORY on the first

line of the LCD.  Press 

STAT

 to view the location of the trouble or

supervisory.

The alarm memory function records alarm information.  Events remain in

memory for a single arming period.  Press 

MEM

 to display the zone