Справочник Пользователя для silent-knight regency 4720c-commercial
Model 4720 Commercial Security System
Page 12
User's Manual
The zone is now reinstated. Repeat steps for all zones that you want to
reinstate.
reinstate.
Bypassing or Reinstating an Armed System
The procedure to bypass or reinstate a zone is the same as when the system
is disarmed, except that the LCD will always display ENTER CODE.
is disarmed, except that the LCD will always display ENTER CODE.
After bypassing a zone, the display will not show BYPASSED, so that no
one else will know that part of the system has been disabled.
one else will know that part of the system has been disabled.
Note: If reinstating an armed zone will cause an alarm, the LCD will show
RESTRICTED ZONE and the zone will remain bypassed.
Activating Chime Sounds
When the system is disarmed, you can turn the chime function on and off by
pressing
CHM
or
INT
.
The chime function will cause a chime sound whenever any chime zone
sensor is activated while the system is disarmed.
sensor is activated while the system is disarmed.
Sending Silent Duress (Hold Up) Alarms
If forced to disarm the system under duress, for example, during an armed
robbery, you can still trigger an alarm report.
robbery, you can still trigger an alarm report.
By pressing a predetermined 1-2 digit duress code (record on page 27)
before entering your access code, you can silently transmit a duress alarm to
the alarm central station.
before entering your access code, you can silently transmit a duress alarm to
the alarm central station.
The system lights and alarms will not indicate that a silent duress alarm is
being sent.
being sent.
Activating Doorstrikes
To activate doorstrikes and open doors programmed for authorized access
only,
only,
1. Press
DOOR
.
2. Enter the proper access code.