Справочник Пользователя для MINOURA rs-4000

- 3 -

Loosen the Upper Quick Release Skewer and pull out

the Upper Frame from the Lower Frame. (see Fig. F)

Lengthen the Upper Frame as you need, then fix its

position with tightening the Upper Quick Release

Skewer. (see Fig. G)

(Fig. F)

(Fig. G)

(Fig. H)

(Fig. I)

Do not set the Q/R lever as per Fing. H

as it may be caught during use and

cause the stand to collaspe. So we

recommend you to set the lever as

shown in Fig. I.

Fully loosen the Clamp Knob and raise the Clamp Jaws and

insert it fully into the square section on the metal bracket (see

Fig. J). Be sure there is only one direction where the Clamp

Jaws can be inserted.

Then tighten the Clamp Knob again to hold the position.

(Fig. J)

(Fig. K)

(Fig. L)

At this time, be careful do not pinch your finger between

the Clamp Jaws and the Metal Bracket. (see Fig. K)

Also the inside edge of the Clamp Jaws may be sharp

and you may cut your finger there. Do not touch the

edge.

If the Clamp Jaws is not fully inserted, you can see the

Clamp Jaws lies down slightly. This means the clamp can-

not hold the weight of the bike enough and it may be broken

or cause an accident, so you must make sure if the Clamp

Jaws is set perfectly. (see Fig. L)