Справочник Пользователя для MINOURA rs-4000

- 5 -

To adjust the Clamp Jaws, turn the small Knob on the Clamp Lever.

If you turn the knob in the direction of the counter-clockwise, the

jaws will open wider.

If you turn the knob in the direction of clockwise, the jaws will be

narrower. (see Fig. R)

If you wish to clamp the top tube of your bike, set the Clamp Jaws

horizontally in advance. (see Fig. S)

(Fig. R)

Place the top tube of your bike onto the lower jaw, and pull up

the Clamp Lever to shut the jaws. (see Fig. T)

If you feel no resistance when the jaws areshut your bike is

not clamped correctly. Turn the Knob on the Clamp Lever

clockwise to make the clearance between the jaws narrower

until you feel some resistance before clamping the jaws fully.

It should be the proper position.

Pull up the lever strongly and shut the jaws until click.

(Fig. S)

Do not turn the knob on the clamp lever for

adjusting the jaws AFTER you have shut the

jaws.

Adjusting the jaws step must be done BEFORE

shutting the jaws.

(Fig. T)

(Fig. U)

Do not set the bike upsidedown as the clamp will not

hold the bicycle securely in the position. (see Fig. U)

We don’t recommend you to use the Clamp Jaws upside

down (the moving part is locating lower) because the bike

may fall off suddenly if the clamp is loosened.