Справочник Пользователя для mulholland omni 1&2
6
ASSEMBLY
Tools Required:
5/32 , 3/16 , 1/4 allen wrenches
Tape measure
Tape measure
Adjustment Levers:
Refer to figure 2.
The adjustment levers can be ratcheted so
the handle can rotate without affecting the
tightness of the screw.
1. Pull up lever to disengage.
2. Rotate the handle so it is not
Refer to figure 2.
The adjustment levers can be ratcheted so
the handle can rotate without affecting the
tightness of the screw.
1. Pull up lever to disengage.
2. Rotate the handle so it is not
obstructed.
3. Release and let the handle slide back
and lock with the screw.
4. Continue tightening/loosening the screw by rotating the handle and
repeating steps 1-3 as needed.
Ball Lock Pins:
Refer to figure 3.
1. Hold the head of the pin between your
Refer to figure 3.
1. Hold the head of the pin between your
index and middle finger.
2. Press in on the blue button with your
thumb while extracting (or inserting)
the pin.
the pin.
Hand Knobs:
Refer to figure 4.
1. Release (unlock) the knob by turning
Refer to figure 4.
1. Release (unlock) the knob by turning
it counter-clockwise.
2. Lock the knob by turning it clock-
wise.
Figure 2
1
Figure 3
Figure 4