Руководство По Работе для Panasonic DMC LX 3
57
VQT1T39
Advanced (Recording pictures)
•
The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the flash is not activated.
Note
•
When the burst mode setting is set to Unlimited
–
The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
–
You can take pictures until the capacity of the built-in memory or the card is full.
•
The focus is fixed when the first picture is taken.
•
When the burst speed is set to [˜], the exposure and white balance are fixed at the settings
used for the first picture for the subsequent pictures as well. When the burst speed is set to
[ò], they are adjusted each time you take a picture.
•
When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.
•
If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
•
The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
•
Burst mode is not cancelled when the camera is switched off.
•
If you take pictures in burst mode with the built-in memory, it will take time to write the picture
data.
•
[Œ] is set for the flash when burst is set.
•
When burst mode is set, auto bracket, multi aspect and [MULTI FILM] settings will be
cancelled.
•
Number of burst mode is fixed to 3 pictures when external flash is used.
[REC] mode:
±´
Taking pictures by specifying the aperture/shutter
speed
Set the aperture value to a higher number when you want a sharp focus background. Set
the aperture value to a lower number when you want a soft focus background.
the aperture value to a lower number when you want a soft focus background.
Set the [REC]/[PLAYBACK] selector switch to [!], and then set the
mode dial to [
].
Tilt the joystick towards 3/4 to set the
aperture value.
Take a picture.
When you want to take a sharp picture of a fast moving subject, set with a faster shutter
speed. When you want to create a trail effect, set to a slower shutter speed.
speed. When you want to create a trail effect, set to a slower shutter speed.
Aperture-priority AE
Shutter-priority AE
1
2
3
EB-DMC-LX3_eng.book 57 ページ 2008年7月14日 月曜日 午後7時38分