Руководство По Работе для Panasonic KXMB2178HK
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
Feature
Code
Description
Default
key
key
Recall/Flash time
#121
The recall/flash time depends on your telephone exchange or host
PBX.
PBX.
Note:
R If the unit is connected via a PBX, PBX functions (transferring a
R If the unit is connected via a PBX, PBX functions (transferring a
call, etc.) might not work correctly. Consult your PBX supplier for
the correct setting.
the correct setting.
–
ADSL mode
#124
When you use a DSL/ADSL line, this feature improves the reliability
by reducing the transmission speed.
by reducing the transmission speed.
Note:
R Calling charges may be higher than usual.
R Calling charges may be higher than usual.
M0N
LCD display
contrast
contrast
#145
To change the LCD display contrast.
M3N
Scale selection
#147
The selected scale will be used when measurements are shown on
the unit’s display.
the unit’s display.
–
Display interval
#148
To set display interval for messages showed alternately.
M1N
Administrator
code
code
#151
To change the administrator code for mode restriction settings. When
entering the new code, using 0-9.
R The default administrator code is “0000”.
entering the new code, using 0-9.
R The default administrator code is “0000”.
Note:
R It is recommended that you change this administrator code from
R It is recommended that you change this administrator code from
the default administrator code.
–
Mode restriction
#154
To activate the mode restriction. See page 96 for details.
M0N
Change password
#155
To change the password for feature programming via remote
operation. When entering the new code, using 0-9.
R The default password is “1234”.
operation. When entering the new code, using 0-9.
R The default password is “1234”.
Note:
R It is recommended that you change this password from the default
R It is recommended that you change this password from the default
password.
R This password is also used for feature programming via a web
browser (LAN supported models only). (y)
–
Maintenance time
#158
The unit will automatically activate for self-maintenance. Enter the
maintenance start time by using the dial keypad.
R The default time is “12:00”.
maintenance start time by using the dial keypad.
R The default time is “12:00”.
Note:
R Do not activate the unit during self-maintenance.
R Do not activate the unit during self-maintenance.
–
Set all features to
default
default
#159
Before you dispose of, transfer or return the product, activate this
feature to reset all programmable features and to delete all data
stored in memory.
R The following items will be deleted.
feature to reset all programmable features and to delete all data
stored in memory.
R The following items will be deleted.
– Address book
– Caller information (y)
– Fax transmission data (journal report and fax received in
– Caller information (y)
– Fax transmission data (journal report and fax received in
memory) (y)
R Disconnect the following cord/cable before activating this feature.
– Telephone line cord (fax supported models only) (y)
– USB cable
– LAN cable (y)
– USB cable
– LAN cable (y)
–
Ringer pattern
#161
To set the ringer pattern.
M1N
39
3. Basic Operations