Руководство По Работе для Panasonic KXMB2178HK

#381

To set the recording paper size in the manual tray.

Note:
R If you have set feature #147 to “INCHES”, the numbers are

displayed in inches.

–

#383

To set the recording paper type for the standard input tray.

Note:
R This setting will be deactivated when printing from a computer. To

set the recording paper type for printing, see page 50.

M1N

#384

To set the recording paper type for the manual tray.

Note:
R This setting will be deactivated when printing from a computer. To

set the recording paper type for printing, see page 50.

M1N

#403

To set the length of time before the unit enters power save mode.

Note:
R During power save mode, the unit needs to preheat the fuser unit

before it can begin printing.

M1N

#462

To hold the previous contrast setting.

Note:
R This feature is not available for scanning contrast.

M0N

#463

To select the default operation mode (copy or fax) when the selected
time of the mode timer (feature #464) elapses.

Note:
R You cannot select scan mode using this feature.

M1N

#464

To set the timer before returning to the default operation mode
(feature #463).

M2N

#478

The selected job will be displayed first.

M1N

#479

To view the count number of copies/prints for departments. See
page 97 for details.

–

#482

To set the toner save feature. When this feature is activated, the toner
cartridge will last longer.

Note:
R This feature may lower the print quality by reducing toner

consumption.

R This setting is valid for copying, and when the unit prints reports/

lists.

R This setting is invalid for printing received faxes (fax supported

models only). (y)

M0N

#497

The selected job will be displayed first.

M1N

3.7 Programming through a web browser (LAN supported models
only) y

You can change features through the web browser interface instead of the unit.

Start Multi-Function Station. A [Device] A [Configuration Web Page]
R You can also access the unit by entering its IP address in a web browser.

41